GCOAT
GCOAT
OVERVIEW
Gcoat™ All Purpose Joint Compound is an air drying ready-mixed compound designed for applying drywall filling, repairing cracks, trimming, hiding screws, and skim coating in interior gypsum board systems.
Being easy to apply Gcoat™ has a wide coverage with low dust emission. An eco-friendly ready to use solution for drywall systems.
- Wide coverage
- Smooth finishing
- Air drying
- Wide coverage
- Smooth finishing
- Air drying
Advantages
Ready to use, workable, and easy to apply mortar.
Highly performant joint compound with low dust emissions.
No cracks in 50 mm zones.
Standards
BS EN 13963 :2014 type 3A
Iso 9001 :2015
METHOD OF USE
Substrates must be dry, clean, and dust-free.
Apply a layer of primer before applying Gcoat™ to avoid the rapid absorption of the mixed water.
Do not dilute the product with more than 100ml water (if needed) because excess dilution will decrease the adhesive strength of Gcoat™.
STORAGE & HANDLING
Stored under proper conditions for one year maximum, starting from the manufacturing date.
Keep the container tightly sealed.
Protect from extreme cold and heat as well as exposure to direct sunlight.
Store at 13-35°C (55-95°F) in a dry environment.
PHYSICAL SPECIFICATIONS
SPECIFICATIONS | UNIT | VALUE |
| Drying time | Hours | 24 |
| pH | – | 8.5:10 |
| Practical size distribution | 200µm sieve | ≤1% |
| Adhesive strength | N/mm² | ≥0.25 |
| Low VOC content | g/L | 3 |
| Coverage per 28kg buckets | m² | 46-56 |
| Standard | – | EN 13963 |
PHYSICAL SPECIFICATIONS
|
SPECIFICATIONS |
UNIT |
VALUE |
| Drying time | Hours | 24 |
| pH | – | 8.5:10 |
| Practical size distribution | 200µm sieve | ≤1% |
| Adhesive strength | N/mm² | ≥0.25 |
| Low VOC content | g/L | 3 |
| Coverage per 28kg buckets | m² | 46-56 |
| Standard | – | EN 13963 |
