CBOARD RG
CBOARD RG
OVERVIEW
- Termite resistance
- Advanced impact resistance
- Fire Resistance
- Durable
Applications
- Wall Cladding
- Roof Underlay
- Soffit & Eaves Lining
- False Ceilings & Suspended Ceilings
- Partition Walls
- Drywall Systems
- Dry Lining
Features
- Non-Combustible
- Environmentally friendly
- Thermal Insulation
- Impact Resistant
- Termite Resistant
- Easy Installation
- Low Maintenance
- Moisture resistant
- Advanced impact resistance
- Fire resistant
- Textured
Board Composition
Component Function
Portland Cement: Provides structural strength and durability
High-Purity Silica Sand: Improves flexural strength to the mix and fills small voids.
Reinforcing Pulp (Recycled): Improves impact resistance and flexibility
Water: Aids in curing and hydration of cement
Additives: Increases resistance to fire and moisture
Advantages
Asbestos free board.
Surface Finishing
Painted (water or oil base paint)
Cladding (wallpaper, vinyl, wood…)
Joint filling with Ccoat™ All Purpose
Joint Compound
Edge Types
Squared Edge
Tapered Edge
Beveled Edge
STANDARDS
ASTM C1186
ASTM E84
ASTM C518
Dimensions
Width: 1200, 1220mm
Length: 2400mm, 2440mm, 3050mm, 3200mm
Thickness: 6mm, 9mm, 12mm, 15mm, 16mm, 18mm
*Varying dimensions available upon request
RECOMMENDATION
• Cut the board using an electrical saw.
• Use zinc self-tapping screws with a metal frame of less than 0.7mm to fix the boards.
• Use zinc self-drilling for a metal frame greater than 0.7mm to fix the boards.
• Vertical screw spacing for the first layer of Cboard® is 25cm, 50cm for the second, and 75cm for the third.
STORAGE & HANDLING
• Avoid contact with moisture or high temperatures for prolonged periods of time.
• Store in a dry/ventilated area above ground level (not in direct contact with the ground).
• Cover the boards with plastic sheets.
• Avoid direct rain or sunlight.
• Avoid cracking or damaging the boards during installation.
PHYSICAL SPECIFICATIONS
SPECIFICATIONS |
UNIT |
VALUES |
STANDARDS |
| Thickness | mm | 12 | EN 12467 |
| Density | Kg/m³ | 1300 | EN 12467 |
| Tolerance of length | mm | 2399 | EN 12467 |
| Tolerance of width | mm | 1200 | EN 12467 |
| Tolerance of thickness | mm | 12.2 | EN 12467 |
| Squareness | mm/m | 1.7 | EN 12467 |
| Bending strength longitudinal direction | MPa | 5.15 | EN 12467 |
| Bending strength transversal direction | MPa | 11.26 | EN 12467 |
| Reaction to fire | – | A1 | EN 13501 |
| Water tightness | – | No water drops seeping through the sheets. | EN 12467 |
PHYSICAL SPECIFICATIONS
SPECIFICATIONS |
UNIT |
VALUE |
STANDARDS |
| Thickness | mm | 12 | EN 12467 |
| Density | Kg/m3 | 1506 | EN 12467 |
| Tolerance of length | mm | 2399 | EN 12467 |
| Tolerance of width | mm | 1200 | EN 12467 |
| Tolerance of thickness | mm | 12.2 | EN 12467 |
| Squareness | mm/m | 1.7 | EN 12467 |
| Bending strength longitudinal direction | MPa | 5.15 | EN 12467 |
| Bending strength transversal direction | MPa | 11.26 | EN 12467 |
| Reaction to fire | – | A1 | EN 13501 |
| Water tightness | – | No water drops seeping through the sheets. | EN 12467 |
