GBOARD ADVANCED MR H1
GBOARD ADVANCED MR
OVERVIEW
Gboard® Advanced MR is classified as an H1 board having the lowest percentage (<5 %) of water absorption. A superior moisture resistant gypsum board with silicon oil in the core acting as a water repellent, Gboard® Advanced MR’s core is highly resistant to moisture.
Gboard® Advanced MR has a green paper face with a higher core density increasing its moisture resistance properties. It is perfect for areas of high humidity as it provides impeccable protection against moisture exposure. All materials are certified based on ASTM and EN standards and tested in approved laboratories.
- Low moisture absorption
- Thermally balanced
- Suitable sound insulation
- Low moisture absorption
- Thermally balanced
- Suitable sound insulation
Advantages
The lowest percentage of water absorption (less than 5%).
Impeccable protection against moisture in areas of high humidity.
Surface Finishing
Multiple finishing options: Painted (Water or oil bas paint)
Wallpaper, vinyl, wood…
Joint filling With Gcoat™ All Purpose Joint Compound
Edge Types
Squared edge
Tapered edge
Beveled edge
STANDARDS
ASTM C 1396
ASTM C 473
ASTM C 518
Dimensions
Width: 1200mm, 1220mm
Length: 2000mm, 2400mm, 2440mm, 2500mm, 3000mm
Thickness: 8mm, 9.5mm, 12.5mm, 15mm, 15.9mm, 18mm
*Varying dimensions available upon request
RECOMMENDATION
Cutting and scoring are completed from the front face of the board.
Vertical screw spacing for the first layer of gypsum is 25 cm, 50 cm for the second, and 75 cm for the third.
It is recommended to use Gcoat All Purpose Joint Compound to treat joints or for skim coating.
STORAGE & HANDLING
Avoid contact with water or temperatures higher than 50°C for prolonged periods of time.
Store in a dry/ventilated area above ground level (not in direct contact with the ground).
Avoid cracking or damaging the boards during installation.
PHYSICAL SPECIFICATIONS
SPECIFICATIONS | UNIT | VALUE | STANDARDS |
| Thickness | mm | 12.5 | ASTM C1396 |
| Density | Kg/m³ | 756.48 | ASTM C1396 |
| Weight per unit area | Kg/m² | 9.36 | ASTM C1396 |
| Depth of taper | mm | 1.21 | ASTM C1396 |
| Width of taper | mm | 42.23 | ASTM C1396 |
| Flexural breaking load long edge | N | 506 | ASTM C1396 |
| Flexural breaking load short edge | N | 205 | ASTM C1396 |
| Nail pull strength | N | 372 | ASTM C1396 |
| Thermal conductivity | W/m.K | 0.1622 | ASTM C518 |
| Water absorption | % | <5 | ASTM C1396 |
PHYSICAL SPECIFICATIONS
SPECIFICATIONS |
UNIT |
VALUE |
STANDARDS |
| Thickness | mm | 12.5 | ASTM C1396 |
| Density | Kg/m³ | 756.48 | ASTM C1396 |
| Weight per unit area | Kg/m² | 9.36 | ASTM C1396 |
| Depth of taper | mm | 1.21 | ASTM C1396 |
| Width of taper | mm | 42.23 | ASTM C1396 |
| Flexural breaking load long edge | N | 506 | ASTM C1396 |
| Flexural breaking load short edge | N | 205 | ASTM C1396 |
| Nail pull strength | N | 372 | ASTM C1396 |
| Thermal conductivity | W/m.K | 0.1622 | ASTM C518 |
| Water absorption | % | <5 | ASTM C1396 |
