GBOARD DECILOC
GBOARD DECILOC
OVERVIEW
Gboard® Deciloc is a complete sound barrier. Due to its high density and high fiber content, when installed in a partition system, ceiling or dry lining system, sound transmission from one area to another is practically eliminated. Gboard® Deciloc STC rating is designed to reach a sound attenuation up to 75 dB within the system.
Gboard® Deciloc is used in loud spaces to eliminate sound transmission to neighboring areas. It can be installed around generators and technical rooms, office spaces, hospitals, meeting rooms, cinemas, theaters, and large commercial areas where separation is needed.
- Sound blocking
- Superior sound damping
- High rated STC wall assemblies
- Sound blocking
- Superior sound damping
- High rated STC wall assemblies
Advantages
Minimizing noise transmission from one space to another.
Controlled noise and sound to improve the work and living quality of the building’s occupants.
Surface Finishing
Multiple finishing options: Painted (Water or oil bas paint)
Wallpaper, vinyl, wood…
Joint filling With Gcoat™ All Purpose Joint Compound
Edge Types
Squared edge
Tapered edge
Beveled edge
STANDARDS
ASTM C1396
ASTM C473
ASTM C518
Dimensions
Width: 1200mm, 1220mm
Length: 2000mm, 2400mm, 2440mm, 2500mm, 3000mm
Thickness: 8mm, 9.5mm, 12.5mm, 15mm, 15.9mm, 18mm
*Varying dimensions available upon request
RECOMMENDATION
Cutting and scoring are completed from the front face of the board.
Vertical screw spacing for the first layer of gypsum is 25 cm, 50 cm for the second, and 75 cm for the third.
STORAGE & HANDLING
Avoid contact with water or temperatures higher than 50°C for prolonged periods of time.
Store in a dry/ventilated area above ground level (not in direct contact with the ground).
Avoid cracking or damaging the boards during installation.
PHYSICAL SPECIFICATIONS
SPECIFICATIONS | UNIT | VALUE | STANDARDS |
| Thickness | mm | 12.5 | ASTM C1396 |
| Density | Kg/m³ | 870.2 | ASTM C1396 |
| Weight per unit area | Kg/m² | 10.71 | ASTM C1396 |
| Depth of taper | mm | 1.24 | ASTM C1396 |
| Width of taper | mm | 42.3 | ASTM C1396 |
| Flexural breaking load long edge | N | 536 | ASTM C1396 |
| Flexural breaking load short edge | N | 249 | ASTM C1396 |
| Nail pull strength | N | 377 | ASTM C1396 |
| Thermal conductivity | W/m.K | 0.1799 | ASTM C518 |
PHYSICAL SPECIFICATIONS
|
SPECIFICATIONS |
UNIT |
VALUE |
STANDARDS |
| Thickness | mm | 12.5 | ASTM C1396 |
| Density | Kg/m³ | 870.2 | ASTM C1396 |
| Weight per unit area | Kg/m² | 10.71 | ASTM C1396 |
| Depth of taper | mm | 1.24 | ASTM C1396 |
| Width of taper | mm | 42.3 | ASTM C1396 |
| Flexural breaking load long edge | N | 536 | ASTM C1396 |
| Flexural breaking load short edge | N | 249 | ASTM C1396 |
| Nail pull strength | N | 377 | ASTM C1396 |
| Thermal conductivity | W/m.K | 0.1799 | ASTM C518 |
